Industry Information

Update March 25, 2021

It is very important to store lubricant in a proper way, there are mainly 4 factors. 1. Temperature Control. When the lubricant temperature and water temperature are too high, the oil is prone to...

Update February 24, 2021

Development trend of lubricant additive detergent

From the perspective of the varieties of detergents, they are comparable domestic and overseas, and the product quality is relatively close. 1) In the past, domestic magnesium sulfonate salts needed...

Update January 28, 2021

What are the tips for choosing hydraulic oil?

Everyone knows the importance of hydraulic oil to our equipment. It can maintain the stability of the cylinder, so it is very important to choose a suitable hydraulic oil. Do you know the tips for...

Update January 11, 2021

Why does the emulsified oil float up after a few days?

There are three main types of water-based metalworking fluids, emulsified oil, microemulsion, and fully synthetic. From the oil content to compare emulsified oil>microemulsion>fully synthetic,...

Update December 31, 2020

What does the "extreme pressure" of grease mean?

Extreme pressure is the ability of the lubricating film to bear load without being squeezed out of the friction surface, resulting in a lack of lubrication on the friction surface. Lubricating oil...

Update December 18, 2020

Lubricant price will increase in 2021?

The cost composition of lubricant mainly consists of base oil, additives, package materials, freight and other costs such as production and sales. Affected by the price of basic oil, additives,...

Update September 26, 2020

How to choose suitable Viscosity Index Improver VII when blending different lubricant?

Normally there are 4 widely used types Viscosity Index Improver: OCP type, HSD type, PMA type, PIB type. When blend different lubricant, we usually follow the rules as below. 1) For engine oil: For...

Update September 08, 2020

Difference between marine oil and ordinary vehicle diesel engine

Difference between marine oil and ordinary vehicle diesel engine 1. The basic value of marine oil is generally high. Due to the high sulfur content of marine fuel oil (generally in the range of 0.5%...

Update September 01, 2020

What's the antifoaming principle of antifoam additive?

What's the reason of oil have foam? It can be divided into two aspects, one is surface foaming, it can be controlled by anti-foaming agent, the other is the foam inside the oil, the internal foam is...

Update August 31, 2020

How to choose proper ATF fluid?

How to choose proper ATF fluid? The appearance of ATF fluid on the market is red. Under the mask of color, it is difficult to distinguish its original form. Some even add aromatic essence to confuse...