Industry Information

Update October 22, 2021

How often does the hydraulic wrench need to change the hydraulic oil?

How often does the hydraulic wrench need to change the hydraulic oil? We know that the torque of hydraulic wrenches mainly depends on the conversion of oil pressure provided by the special pump...

Update October 20, 2021

Detailed explanation of the classification and application of cutting oil, a must-see for novices!

Detailed explanation of the classification and application of cutting oil, a must-see for novices! In metal processing operations, cutting oils can basically be divided into three categories:...

Update October 18, 2021

To do a good job of grinding, you must choose the grinding fluid according to these principles! Remember! ! !

To do a good job of grinding, you must choose the grinding fluid according to these principles! Remember! ! ! Grinding has relatively high requirements for cutting fluid. Through the following...

Update October 15, 2021

How to solve the problems faced by water-based quenching additive?

How to solve the problems faced by water-based quenching additive? Problems encountered in quenching liquid during quenching and suggestions for solutions 1. Quenching abnormality (1) Quenching...

Update October 13, 2021

Is the lighter and brighter the grease, the better the performance and quality?

Is the lighter and brighter the grease, the better the performance and quality? There is a friend who often uses color to distinguish between good and bad grease when he buys grease. Once when he was...

Update October 07, 2021

After rolling and annealing, there are many residues on the surface of the strip. Is it because the quality of the rolling oil is not good?

After rolling and annealing, there are many residues on the surface of the strip. Is it because the quality of the rolling oil is not good? The surface residues after rolling and annealing mainly...

Update October 04, 2021

The most scientific and practical metal processing waste liquid emission reduction measures!

The most scientific and practical metal processing waste liquid emission reduction measures! Based on the analysis of the advantages and disadvantages of various metal processing fluid emission...

Update October 02, 2021

The magical effect of nano silica in lubricants!

The magical effect of nano silica in lubricants! In recent years, with the rapid development of nanotechnology, the excellent lubricating properties of nano-lubricating additives have attracted...

Update September 30, 2021

Titanium alloy is difficult to machine, cutting fluid is selected in this way to extend tool life by 8 times.

Titanium alloy is difficult to machine, cutting fluid is selected in this way to extend tool life by 8 times. The cutting force during titanium alloy processing is only slightly higher than that of...

Update September 21, 2021

Frequent Problems for Cutting and Grinding fluids to solve

Cutting and grinding fluids solve these seven problems in use and maintenance, and extending the service life of cutting and grinding fluids is not a problem! 1. Add water directly-the concentration...