Before using metal Anti-rust Oil on metal products, there will usually be stains on the surface, or residual liquid during processing, so the metal products must first be cleaned and dried before using the anti-rust oil. Sometimes when the manufacturer rushes for delivery, the metal rust preventive oil is applied if the cleaning is not complete or the drying is not complete. It is very likely that the remaining stains will be wrapped in the rust preventive oil. After time, it may still be mildewed and corroded, so metal products Before using the metal anti-rust oil, it is very important to thoroughly clean and dry it, otherwise the anti-rust ability of the metal anti-rust oil will be greatly affected.
After the metal products are thoroughly cleaned and dried, the metal anti-rust oil can be applied. Generally, the method of operation is selected according to the size and structure of the product. But no matter which method you choose to apply anti-rust oil, you must achieve these goals: 1. The anti-rust oil should be completely covered on the product, without gaps, no bubbles formed by air, and the anti-rust oil film should be thin and even. 2. After the metal products are coated with anti-rust oil, leave enough time to dry or dry the oil film in a dry environment before packaging.
After the metal products are coated with anti-rust oil, wait for the oil film to dry before proceeding to the next step. Generally, it can be wrapped in rust-proof paper, or sealed in plastic bags, and then stored in a dry and ventilated environment, or transported to the customer. If metal products need to be stored outdoors, it is recommended to store them in a shed, which can reduce the corrosion of the product by sunlight or rain and extend the rust prevention time. It can be seen from the above that the cleaning process before use of metal anti-rust oil and the packaging and storage process after use are also very important. Therefore, the user should pay more attention to these steps. Otherwise, it may cause metal Anti-rust oil cannot fully exert its effect.
