Preparation method of anti-rust emulsified oil for ultra-fine copper wire drawing!

April 11, 2022

Preparation Method

No. 5 white mineral oil, rapeseed oil, Taikoo oil, sodium petroleum sulfonate with 65%~40% active substance, OP-10 and benzotriazole were added to the high shearing speed of 1800~2000r/min in turn Stir evenly in the emulsifier, then add water, and continue stirring for about 40 minutes, until the original solution turns from turbid to transparent. The stock solution is diluted by 1: (15~20) to obtain an anti-rust emulsified oil for drawing ultra-fine copper wire that can be used directly.

Raw Material Ratio (by weight ratio)

No. 5 White Mineral Oil	525
Rapeseed Oil	105
Taikoo Oil	105
Petroleum Sodium Sulfonate (40%~65% active substance)	126
OP-10	96
Benzotriazole	2
Water	160

Material Compatibility

The proportions of each component of this product are as follows: No. 5 white mineral oil 45~50, rapeseed oil 6~10, Taikoo oil 6~10, active substance 40%~65% petroleum sodium sulfonate 10~ 14, OP-10 8~12, benzotriazole 0.2~0.6, clear water 12~16.

anti-rust emulsified oil

Product application

This product is used as antirust emulsified oil for ultra-fine copper wire drawing.

Product Features

This product has good cleaning and anti-rust performance, and its superior performance ensures that the product will not change color when stored for 3 to 5 months, and is non-toxic and non-irritating.

The above methods are for reference only!

The above is the Preparation method of anti-rust emulsified oil for ultra-fine copper wire drawing! we have listed for you. You can submit the following form to obtain more industry information we provide for you.

You can visit our website or contact us, and we will provide the latest consultation and solutions

Share to:

Send Inquiry

Previou:Why is the acid value of the industrial gear oil in use high?

Next:The application effect of water-based molybdenum in water-based cutting fluid turned out to be so good!

Most Popular