Company Details

Zhengzhou Chorus Lubricant Additive Co.,Ltd. [Henan,China] Business Type:Agent , Distributor/Wholesaler , Manufacturer , Service , Trade Company Main Markets: Africa , Americas , Asia , Europe , Middle East , Oceania , Worldwide , East Europe , North Europe , Other Markets Exporter:51% - 60% Certs:ISO14001, ISO9001, API, CB, CCC

Language

Emulsified oil and water mixed does not emulsify, how to do?

February 26, 2024

Emulsified oil and water mixed does not emulsify, how to do?

When emulsified oil and water are not emulsified, we must first analyze what causes the non-emulsification, generally this problem is roughly caused by water quality, the quality of emulsified oil or other substances mixed in the process of use.

If you choose to dilute the emulsified oil with a larger hardness of groundwater, the light will make the emulsion appear slick oil, soap, heavy produce non-emulsification phenomenon, because the emulsified oil contains some anionic surfactants, anti-rust agents, mechanical oil has an emulsification effect, and the water calcium and magnesium ions are very high, and the calcium salt and magnesium salt are combined with the anion to produce oil slick, soap float. When the amount of calcium and magnesium ions is large, the amount of anions consumed is more, the surfactant in the system is consumed in large quantities, so that the original balance of the system is destroyed, and ultimately, the hard water is replaced by tap water or soft water, this problem can be solved.

In addition, before the use of emulsified oil to confirm the emulsification of the product, a small amount of emulsified oil can be mixed with tap water or soft water, if fully emulsified can be determined that its emulsification is no problem, it is worth noting that in the extraction of emulsified oil, oil pumping or straw must be special, not to pump lubricating oil and then pump emulsified oil, lubricating oil immersed in emulsified oil can destroy the stability of the emulsion oil system, Resulting in non-emulsification or yellow oil mixture or oil block insoluble matter, resulting in emulsion instability, thereby affecting other properties, in addition to the mixing of lubricating oil, but also pay attention to the storage and use of the process, do not mix strong acids, strong alkalis, strong oxidants, strong electrolytes and other substances.

The above is the Emulsified oil and water mixed does not emulsify, how to do? we have listed for you. You can submit the following form to obtain more industry information we provide for you.

You can visit our website or contact us, and we will provide the latest consultation and solutions

Share to:

Send Inquiry

Previou:Automotive lubricant basics, 5 minutes to take you "literacy"!

Next:What factors should be considered in the selection of high-speed rolling bearing grease?