Introduction:
One of the most important characteristics of guide rail oil is that it must be able to well separate from water-based cutting fluid, rather than be miscible. And the demulsibility of guide rail oil is always excellent.
When lubricating mechanical tools, the guide rail oil must reduce its friction and even redundant movement as much as possible, so as to ensure that the processed material has a smooth surface. When the mechanical tools run at low speed and high load, the guide rail oil shall not lose adhesion and other undesirable phenomena. Guide rail oil completely meets or even exceeds all kinds of harsh requirements of these mechanical equipment for guide rail oil lubrication.
Description:
T5018 is a kind of ashless slideway Lubricant Additive Package. It can provide good oxidation resistance, stable anti-corrosion and anti-rust performance, and effective anti-friction and anti-creep performance. It is formulated by various kinds of the excellent additives, including high quality TBN Booster Calcium Sulfonate, High Temperature Antioxidant, Antiwear Ep Additive, Rust Preventative Anti-rust Additive, Friction Modifier , etc.
| Recommend Dosage |
| Performance | Dosage(W%) |
| L-HG L-G | 2 |
Recommend Dosage |
| Performance | Dosage(W%) |
| L-HG L-G | 2 |
| Characteristics |
| Item | Typical Value |
| Appearence | Transparent liquid |
| Kinematics Viscosity(100℃)mm2/s | Report |
| Flash point,℃ | ＞110 |
| Sulfur content,wt% | ≥5.0 |
| Phosphorus content,wt% | ≥2.5 |
Recommend Scheme-1:Take blending slideway oil-68# for example. Using GroupⅡbase oils--150N and 500N.
| Application Examples And Test Items | Typical Value | Slideway Oil - 68# | Test Method |
| 150N | | 21 | |
| 500N | | 77 | |
| T5018A | | 2 | |
| | GB/T11118.1 | SH/T0361 | Report | |
| L-HG | L-G |
| Kinematics Viscosity 40℃,mm2/s | 61.2~74.8 | 68.94 | GB/T265 |
| Copper Corrosion 100℃ 3h, rating | ≤1 | -- | 1b | GB/T5096 |
| Copper Corrosion 60℃ 3h, rating | -- | ≤2 | -- |
| Liquid Phase Rust Test, method A | Rustless | Rustless | Rustless | GB/T11143 |
| Wear Scar Diameter(392N,60min,75℃,1200r/min)/mm | Report | -- | 0.46 | SH/T0189 |
| Wear Scar Diameter(200N,60min, 1500r/min)/mm | -- | ≤0.5 | 0.29 |
| Pour Point,℃(without PPD) | ≤-6 | -- | -- | GB/T3535 |
| -- | ≤-9 | -18 |
| Demulsification, 54℃,min | Report | -- | 40-37-3(7) | GB/T7305 |
| Antifoaming,ml/ml | | GB/T12579 |
| Before 24℃ | 150/0 | -- | 20/0 |
| 93.5℃ | 75/0 | 20/0 |
| After 24℃ | 150/0 | 20/0 |
Recommend Scheme-2:Take blending slideway oil-68# for example. Using paraffin GroupⅠbase oils--150N and 500N.
| Application Examples And Test Items | Typical Value | Slideway Oil - 68# | Test Method |
| 150SN | | 22 | |
| 500SN | | 76 | |
| T5018A | | 2 | |
| | GB/T11118.1 | SH/T0361 | Report | |
| L-HG | L-G |
| Kinematics Viscosity 40℃,mm2/s | 61.2~74.8 | 66.82 | GB/T265 |
| Copper Corrosion 100℃ 3h,rating | ≤1 | -- | 1b | GB/T5096 |
| Copper Corrosion 60℃ 3h,rating | -- | ≤2 | -- |
| Liquid Phase Rust Test, method A | Rustless | Rustless | Rustless | GB/T11143 |
| Wear Scar Diameter(392N,60min,75℃,1200r/min)/mm | Report | -- | 0.45 | SH/T0189 |
| Wear Scar Diameter(200N,60min, 1500r/min)/mm | -- | ≤0.5 | 0.31 |
| Pour Point,℃(without PPD) | ≤-6 | -- | -- | GB/T3535 |
| -- | ≤-9 | -12 |
| Demulsification 54℃,min | Report | -- | 40-37-3(9) | GB/T7305 |
| Antifoaming,ml/ml | | GB/T12579 |
| Before 24℃ | 150/0 | -- | 40/0 |
| 93.5℃ | 75/0 | 20/0 |
| After 24℃ | 150/0 | 40/0 |
● Other Additives
As a professional manufacturer of Lubricant Additive for years, our main products is Component, Additive Package and Metal Working Fluid, such as Calcium Sulfonate & Tbn Booster , Diesel Engine Oil Additive Package, Water Soluble Semi Synthetic Cutting Fluid ect.. If you need it, please tell us your request, and then we can provide you a professional service. My contact information is: Whatsapp/Skype/Line:+8615903873562
Contact Now
