With the strict requirements of environmental protection in recent years, more and more companies pay attention to environmental protection in the use of cutting fluid, which does not stink and does not need to be replaced. Most factories have abandoned the use of emulsions and opted for semi-synthetic cutting fluids. So, will the semi-synthetic cutting fluid stink during use? Below is the analysis for you.
The answer is yes, semi-synthetic cutting fluid will also stink, for the following two reasons: 1. Impurities mixed in semi-synthetic cutting fluid Semi-synthetic cutting fluid also contains some base oils. If the user does not maintain it properly, impurities such as garbage, rail oil or other oils may be mixed in it. It will breed bacteria and it will have a bad smell, and then it will stink. Even the color of the oil will turn cloudy.
2. Low concentration of semi-synthetic cutting fluid machine Semi-synthetic cutting fluid is added to the machine after mixing with water. Generally, there will be a concentration control. The general use concentration is recommended to be within the range of 10-15. Not less than 10, not higher than 15, the concentration is too low, the bactericide in the semi-synthetic cutting fluid will be diluted, shorten the service life of the cutting fluid, and make it stink while eating. It will also affect the life of the tool and the finish of the product. In fact, whether the cutting fluid will stink mainly depends on the product system and the maintenance of its use. No matter how good the cutting fluid is, it also needs everyone's maintenance. Good cutting fluid is well maintained and does not need to be changed in 1 year.
