Chain conveyor is a common type of transmission machinery in industrial production, such as newly coated (painted) household appliances that must go through a drying channel and be dried and shaped while moving. The use of chain machines is very extensive, covering various aspects such as transportation, agriculture, mining, food, mechanical component painting, textile shaping, stretching and stretching, building materials, and so on. The smooth operation of the chain machine and the flexibility of the chain links rely on good lubrication.
The lubrication system of the chain regularly and quantitatively fills the gap between the pin shaft and sleeve of the chain with chain oil, so as to produce lubrication effect and minimize the consumption of lubricating oil as much as possible. The working environment temperature of the chain machine is mostly at high temperatures, ranging from less than 150 ℃ to more than 300 ℃. So the vast majority of chain oil belongs to high-temperature chain oil. Classification of high-temperature chain oil 1) Mineral oil type and semi formed chain oil: It is made by blending mineral oil and PAO in an appropriate proportion into Base Oil and adding functional additives. Applicable temperature is less than 150 ℃. 2) PAO type high-temperature chain oil: PAO is the base oil, a small amount of ester oil is added as the solubilizer, a small amount of polybutylene is used as the viscosity enhancer, and an appropriate amount of functional additives are added. Applicable temperature is less than 150 ℃. 3) polyether type high-temperature chain oil: It is made by blending epoxy ethylene propane oligomer as the base oil and adding an appropriate amount of antioxidants, rust inhibitors, and other additives. Applicable temperature: 150~250 ℃. 4) Ester high-temperature chain oil: made from ester oil as the main base oil, mixed with appropriate viscosity increasing agents and functional additives. Applicable temperature: 220-300 ℃. 5) Add solid and semi solid lubricating materials such as molybdenum disulfide. The applicable temperature can be greater than 260 ℃. High temperature chain oil usage occasions Suitable for heat setting and stretching machines in the textile printing and dyeing industry; Chain transmission system for high-temperature drying rooms in the building materials industry; Kiln car hub bearings in refractory material factories; Chain transmission systems for automobiles and other paint drying rooms; The drying room support hub of the cement plant; Spray painting line drying oven; Other high-temperature occasions. Main technical indicators of high-temperature chain oil 1) Viscosity index, greater than 100 or 150. 2) 40 ℃ kinematic viscosity, 220mm2/s or 320mm2/S 3) The acid value (neutralization value) is less than 0.25mgKOH/g, with some exceeding 0.5mgKOH/g. 4) Flash point, greater than 240 ℃. 5) Evaporation loss (250 ℃, 1 hour), some oil products have this requirement, usually not exceeding 2.5%. Although high-temperature chain oil is a small type of oil with a relatively single purpose, it is never just any oil that can be used. Both preparation and use must be taken seriously. There are many types of chain oil abroad that are suitable for various usage scenarios. You can refer to it for adoption.
