Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
December 17, 2021
There are still relatively few testing standards for metal cutting fluids in China, and only a few can be consulted. However, cutting fluid is a product that is often used in the metal cutting and grinding process. It can be said that the metal cutting fluid plays a key role in the processing of the entire workpiece, the degree of quality completion, and the surface roughness. Today we can find the metal cutting fluid testing standards stipulated in the testing indicators for everyone to explain in detail.
1) The test items specified in GB/T 6144-2010 "Synthetic Cutting Fluid" mainly include:
Requirements for shrinking solid powder: no hard agglomerates, uniform powder that is easily soluble in water.
2. The storage stability test means that there is no delamination, phase change, or colloid, etc., and it can be restored to the original state after the test.
3. Transparency testing refers to requirements for transparency or translucent.
4. The corrosion test shall be carried out with cast iron, copper, and aluminum alloy test pieces.
5. The rust resistance test requires that the temperature is 33-37 degrees Celsius. The single chip rust resistance test needs to pass the 24 hours test to be qualified, and the laminated sheet rust resistance test needs to pass the 4 hours test to be qualified.
2) The test items specified in JB/T 7453-2013 "Semi-synthetic Cutting Fluid" mainly include:
1. Appearance inspection index requirements: uniform and transparent liquid.
2. The storage and transportation stability test indicators require no discoloration, no delamination, and a uniform transparent liquid.
3. The phase state detection index requires uniform transparency or translucent.
4. The corrosion test shall be carried out with cast iron, copper, and aluminum alloy test pieces.
5. The stability test of the diluent requires no oil or soap precipitation.
6. The anti-rust test requires a temperature of 33-37 degrees Celsius. The single-chip anti-rust test needs to pass 24 hours to pass the test, and the laminated anti-rust test needs to pass 4 hours to pass the test.
3) The testing items specified in GB/T 31469-2015 "Cutting Fluid for Semiconductor Materials" mainly include:
In fact, there is also a local standard DB22/T 467-2009 "Clean Synthetic Metal Cutting Fluid" in the metal cutting fluid testing standard. Since it is not authoritative, we will not repeat it here. There are also several related standards for metal detection methods.
They are specifically:
SN/T 2704.1-2010 "Cutting fluid and machine tool excretion fluid Part 1: Determination of phosphate ion chromatography"The above is the Secrets of metal cutting fluid testing standards! Be sure to collect it! we have listed for you. You can submit the following form to obtain more industry information we provide for you.
You can visit our website or contact us, and we will provide the latest consultation and solutions
Send Inquiry
Most Popular
lastest New
Send Inquiry
Send Inquiry
Mr. James
Tel:0086-371-58651986
Fax:
Mobile Phone:+8613783582233
Email:sales@cn-lubricantadditive.com
Address:No.11 Changchun Road, High-Tech Zone, Zhengzhou, Henan
Related Products List
Mobile Site
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.