At present, with the continuous advancement of technology, the equipment lubrication is also facing new challenges. The higher and higher operating temperature, the increasing load, the faster and faster operating speed, the more and more large amount of cooling water consumption, the more The shorter of the bearing life, the more frequent bearing damage, more and more stop repair, what kind of concentrated lubricating fat can ensure that the bearing cycle is running? High temperature resistance -is the primary condition to ensure other properties, high -pole pressure, good water resistance, can ensure abrasion resistance at high temperature, ensure oxidation stability at high temperature, and stable mechanical stability at high speed.
Sulfin polymerization is the best choice for bearing of bearing at about 200 degrees, and it is also the only choice for continuous operation at high temperatures. Sulfenyl golf aggregation structure is the latest internationally aggregate structure with stable structure.
Composite lithium -based fat, and can be widely used in various complex environments, such as: high temperature, high speed, heavy load, low speed, water, steam, steam, acid -base corrosion conditions of the bearings, gears, chains, bolts and other multi -purpose High -performance lubrication.
The economic benefits obtained by obtaining general economics and reducing friction power due to the use of reasonable lubrication technology, improving the sealing structure or using new sealing materials to reduce the economic benefits of equipment oil leakage, reduce the wear of friction components, reduce the replacement accessories, and obtain the economy to obtain the economy. Benefits, the economic benefits obtained by the use of the use of equipment to reduce the service life of the friction components, and use reasonable lubrication technology to reduce the economic benefits obtained by equipment maintenance costs, and improve the economic benefits obtained by the consumption of lubricants to reduce the consumption of lubricants. Sulfenyl polymerization has the following performance, which adapts to a variety of special environments and harsh conditions. 1) Water hate: Sulfur polymerization does not absorb water or hydrolysis, the amount of water loss is extremely small, and it also has a strong resistance to seawater and salt water, which is suitable for humid and water -water environments. At the same time, the product contains preservatives effect. The ASTMD1264 experiment shows that the water resistance of Sulfenyl polymer fat is at least more than dozens of times higher than lithium -based grease, grid -based fat, and aluminum fat. 2) Temperature resistance: Sulfen -based polymerizing dripping points are high, and high temperature consistency changes are small, especially suitable for industrial high temperature and low temperature equipment systems. The ASTMD1263 experiment shows that at high temperature, the temperature resistance of sulfenyl polymer fat is at least four times higher than lithium-based grease. 3) Stability: a. Shear stability: Shear stability is one of the important properties of lubrication and maintenance under high -speed operation, and it is also one of the important properties of sulfenyl polymer grease better than cymbal lipids. The ASTMD217 experiment shows that the shear stability of the sulfonic polymerization is ten times higher than that of the basis. b. Anti -aging: Aging during operation is a common problem with lubrication. The sulfenyl polymer delate agent is organic and has no catalytic effect. Even at high temperatures, it is not easy to oxidize and deteriorate. The ASTMD3336 experiment shows that the aging speed of a sulfenyl polymerization is only one tenth of lithium, aluminum -based, and radon. c. Chemical anticorrosiveness: Sulfur polymerization is the only lubricant in the market that not only has water hate but also anticorrosive, but also greatly helps to extend the life of the bearing. The salt fog experiment shows that the anticorrosive polymerization of sulfa polymerization is twenty times higher than lithium-based and base grease. Due to the above performance, sulfenyl polymerization fat is often 2 to 6 times the life of bearing, gear, steel cables, etc. in cases of harsh conditions. Essence Solution: 1. Original composite aluminum lubricating fat, cooling through water, and the surface temperature of the bearing seat is 80 ° C. Lubricate 5 times a week, and the amount of lipids per bearings is 150 grams. Cooling water consumption: 140m3/h. Bearing faults 24 times in half a year. Sulfenyl polymerizing fat: Cancel the bearing seat to cancel the cooling water, and the surface temperature of the bearing seat is 200 ° C. Lubricating every 2 weeks, the amount of fat in each bearing is 150 grams, the bearing failure within half a year decreases from 24 to 6 times, and the bearing fault is reduced by 3/4. 2. Steel factory rolling bearing life is very short, and system plus lubrication is used. Heavy load and high temperature cause lubrication failure. Each rolling machine is 12 bearing, and it needs to be replaced every time it is checked. Use a sulfenyl polymerization fat to check the bearings after three months without any damage. The bearings only need to be checked every three months and lubricate once.
