The weather is getting hotter and there are common problems such as hand allergies among employees in the metal processing industry. Today, let's take a look at how to use metal processing fluids correctly and how to prevent cutting fluids from causing hand allergies among employees Metal Working Fluid is an industrial coolant and lubricant used to reduce friction and heat generation in metal products and lubricants related to machining, grinding, and manufacturing operations during metal processing operations. These liquids extend the lifespan of the machine, taking away metal fragments and protecting the metal surface being processed. There are three types of metalworking fluids: ·Cutting oil (pure oil) ·Semi synthetic (oil in water lotion) ·Fully synthetic synthetic liquid. These liquids may contain preservatives, emulsifiers, defoamers, preservatives, and fungicides. The formula of the oil used depends on the operation to be carried out using the raw materials or cutting amount. Skin issues Skin problems include mechanical damage to the skin, infections, folliculitis, and irritating and allergic dermatitis.
Mechanical trauma Small wounds caused by metal shavings on the skin are a common form of injury, and these cuts can lead to infection due to contact with multi aqueous compound liquids contaminated by microorganisms. Irritant dermatitis The small wounds left by metal fragments on the skin can cause more irritating liquids to penetrate and cause damage to the skin. Irritating dermatitis. The type and concentration of fluids used in work, the duration of contact, and the presence of previously existing skin diseases (eczema or severe dry skin) can all affect the development of dermatitis. Preventing dermatitis One of the main ways to prevent skin problems is to avoid contact with hydrated compounds. Although it is impossible to avoid all contact with liquids, can the irritation of contact be minimized? Liquids can be controlled. Environment Here are some methods to reduce contact with liquids: 1. Keep the work area (including the machine) clean and avoid processing liquids and dirt 2. Install splash protection on the machine. 3. Properly dilute the additives in the liquid, maintain the concentration and pH value of the processing liquid, 4. Ensure the cleanliness of liquid debris and other solid pollutants through circulation and filtration/filtration/filtration, as well as avoid the use of liquids contaminated by excessive microorganisms. How to prevent and prevent dermatitis: 1. Wear clean clothes while working and clean clothes contaminated with cutting fluid;
2. Wear protective aprons and gloves (avoid using latex as it may cause allergic reactions). Due to certain working properties (fast rotating parts on machines), 3. Wash hands with mild, non abrasive soap to remove liquids. 4. Do not use cleaning solvents to clean the skin to remove liquids. These solvents increase the removal of more protective oils from the skin, stimulating the damage caused by polyhydrates. 5. Use moisturizing cream before and after work, and the ointment has the best effect.
These products may appear greasy, but they can heal the skin faster and provide more protection than diluents and water-based formulas. Applying moisturizer to the skin for cleaning, wearing thin cotton gloves for a few hours, or sleeping with gloves can also accelerate the recovery of dry, cracked, and inflamed skin. Cheap 100% Vaseline is also good
6. Using mild soap at home can protect the skin from further damage.
