Company Details

Zhengzhou Chorus Lubricant Additive Co.,Ltd. [Henan,China] Business Type:Agent , Distributor/Wholesaler , Manufacturer , Service , Trade Company Main Markets: Africa , Americas , Asia , Europe , Middle East , Oceania , Worldwide , East Europe , North Europe , Other Markets Exporter:51% - 60% Certs:ISO14001, ISO9001, API, CB, CCC

Language

How to carry out performance comparison test when semi synthetic cutting fluid is replaced with additives

December 06, 2022

Recently, a friend asked about the formula improvement of his Semi Synthetic Cutting Fluid. The question is how to compare the performance of the improved and previous products? How do you know that the improved performance is better than the previous one?

synthetic cutting fluid

The four ball machine introduced earlier is not suitable for evaluating the lubricity of metalworking fluid, especially water-based cutting fluid, which has very poor correlation. Here, he is recommended a tapping torque machine, which has a very good correlation. Tapping torque machine is suitable for both water-based cutting fluid and pure oil products.

synthetic cutting fluid tester

Take a look at this example: performance comparison of semi synthetic system before and after adding polyester.

Polyester has excellent extreme pressure lubricity, greatly prolongs the life of tools and dies, and can greatly improve the aluminum processing performance.

Material: 6061AL
Tap: M6C (cutting and tapping)
Aperture: φ6
Rotating speed: 1000rpm

It shows that the extreme pressure lubricity of the formula has been greatly improved after adding polyester to the semi synthetic system.

The above is the How to carry out performance comparison test when semi synthetic cutting fluid is replaced with additives we have listed for you. You can submit the following form to obtain more industry information we provide for you.

You can visit our website or contact us, and we will provide the latest consultation and solutions

Share to:

Send Inquiry

Previou:Too much cutting fluid foam? Just because these things are not done well!

Next:Cutting fluid deteriorates and stinks? Corrosive? Have you paid attention to these details?