■Product Introduction
T2202 is a kind of compound additive developed for rustproof of metal surface based on the most advanced formula technology.
It is compounded with various high quality rust preventative, Corrosion Inhibitor and film forming agent. Matching with different base oils, the product can formulate displacing type rust preventive oil, thin-film antirust oil, soft-film antirust oil, lubricating antirust oil in appropriate Base Oil or the mixture of solvent oil and base oil, with excellent anti-rust and anti salt spray effect.
On the other hand,our Metal Working Fluid can be classified into: Oil Soluble Metal Working Fluid, Water Soluble Semi Synthetic Cutting Fluid, Water Soluble Fully Synthetic Cutting Fluid and Emulsion Metal Working Fluid by different application. T402B is Oil Soluble Metal Working Fluid.
■Product Usage
| Dosage | Salt Spray Level (A) |
| 12 | 48h |
| 15 | 72h |
| 20 | 168h |
■Product Typical Values
| Item | Quality Index | Test Method |
| Appearance | Brown transparent liquid | Visual inspection |
| Density, 20℃, g/cm3 | Actual measurement | GBT1884 |
| Flash point (open) / ℃ no less than | 160 | GBT 3536 |
| 100oC kinematic viscosity (mm2/S) | 16-18 | GBT 265 |
■Packing & Storage
Refer to SH/T0164 for storage, handling and oil blending. The highest temperature of this product shall not exceed 75°C, and shall not exceed 45°C if stored for a long time.
This product is non-flammable, non-explosive and non-corrosive. In terms of safety, environmental protection and use, it is the same as general petroleum products without special protection.
For skin contact, wash thoroughly with detergent, soap and water.
Packing: 200L standard galvanized iron drum, 180 kg/drum net weight.
According to the chemical nature of the product, the product will be sealed in the customer's customized container in the workshop.
For transportation, we have partners who have been working together for many years. Ensure that the product arrives safely at the customer's address.
Contact Now
