● Feature
The Cutting Oil Emulsion Metal Working Fluid Additive is prepared by this Additive Package is suitable for various ferrous metals and non-ferrous metals with long life.
It is good compatibility, the blended original fluid is stable and has no layer separation, the recommend treat rate is 20%.
● Product Introduction
Antirust Emulsion Metal Working Fluid Additive Package is a high performance additive package, it is formulated with the component with the performance of lubricity, anti-rust, emulsion, ect., which is suitable for paraffin Base Oil and naphthenic base oil.
● Physical/Chemical Data
The following performance data is tested by the formulation: blended by the 20% additive package + 80% naphthenic base oil, and diluted to 5% concentration by tap water.
Item
| Technical Specifications
| Test Method |
Appearance
| Deep Brown Red Liquid
| By Visual
|
Dilution Appearance
| Cream White Liquid
| By Visual
|
Anti-rust Performance
| Qualified
| Strip (24 hours)
|
PH Value (Tap Water 5%)
| 8.5-9.3
| PH Meter
|
Refraction Coefficient
| 1
| Enoscope
|
Aanti-foam Performance
| 0ml/10min
| ml/min
|
● Recommend Formulation
20% Cutting Oil Emulsifier Additive Package + 80% naphthenic base oil, then add oleinic acid about 3-5% (blend to get clear emulsion).
● Similar Products
As a professional manufacturer of Lubricant Additive for years, Our company also can produce other kinds of Metal Working Fluid, such as Oil Soluble Metal Working Fluid, Water Soluble Semi Synthetic Cutting Fluid and Water Soluble Fully Synthetic Cutting Fluid, or other Component and Additive Package. If you need it, please tell us your request, and then we can provide you a professional service. My contact information is: Whatsapp/Skype/Line:+8618339818406
● Package, Storage and Transportation
The product is packed in 200KGS/drum or made to order, suitable for all means of transport. And it shall be stored in dry, cleaning, and ventilated warehouse.
Contact Now
